PDA

View Full Version : Look what UPS delivered

bushido
April 3rd, 2009, 11:27 AM
http://i483.photobucket.com/albums/rr197/rapid25_2008/IMG_0335.jpg
http://i483.photobucket.com/albums/rr197/rapid25_2008/IMG_0337.jpg
http://i483.photobucket.com/albums/rr197/rapid25_2008/IMG_0338.jpg
http://i483.photobucket.com/albums/rr197/rapid25_2008/IMG_0341.jpg
http://i483.photobucket.com/albums/rr197/rapid25_2008/IMG_0342.jpg
:nana:
N2 TRBL
April 3rd, 2009, 11:31 AM
:shocked: i just nutted :thumbs:
Rocman
April 3rd, 2009, 11:35 AM
Very nice!
No Man
April 3rd, 2009, 11:37 AM
Very nice Gilbert. Is that a Dave's big brake caliper kit?
bushido
April 3rd, 2009, 11:42 AM
Very nice Bushido. Is that a Dave's big brake caliper kit?

No, its not Dave's big brake. I have a full srt10 brake swap. Daves kit uses 13 inch rotor for the rears..
Elgreco
April 3rd, 2009, 02:08 PM
I have that same jack.
Red Snake
April 3rd, 2009, 02:10 PM
I have that same jack.

Me 3.







Looks great Bushido. :thumbs:
v10kingsnake
April 3rd, 2009, 02:19 PM
Looks great.
twinturbo3150
April 3rd, 2009, 03:43 PM
Me 3.







Looks great Bushido. :thumbs:


Looks great Bushido, I have 3 of those same jacks. Most of the shit at harbor freight is junk but so far so good.


how much weight did you save over stock?
bushido
April 3rd, 2009, 04:37 PM
how much weight did you save over stock?

I actually had some other 2 piece 14inch rotors that weighed exactly the same as the euro-tecks. I wanted a bit more bling. So thats why I bought these..

btw, the 14in. rotors weigh 17lbs a piece..
Snk Btn 2
April 3rd, 2009, 05:21 PM
Replacing the rotors/calipers/pads on a Viper -is it pretty straight forward - or do I need special tools? I've replaced the rotors and pads on my Vette which is fairly easy.
k-80-123
April 3rd, 2009, 05:27 PM
Looks Great!!
DEVILDOG
April 3rd, 2009, 07:12 PM
Awesome!:thumbs: How about some pics w/ the wheels on? Should look great w/ those silver hats behind your black VR3Ps. What kind of springs are those?
Ram4whldr
April 3rd, 2009, 08:40 PM
Looking nice!!!!
04mystic
April 3rd, 2009, 08:58 PM
Those look very very nice. I would cover up the "Euro" part though...
Rocman
April 3rd, 2009, 09:16 PM
I have 2 similar jacks, except mine are Snap On. :D
bushido
April 3rd, 2009, 09:49 PM
I have 2 similar jacks, except mine are Snap On. :D

Good for you, pie gobbler..
bushido
April 3rd, 2009, 10:41 PM
Awesome!:thumbs: How about some pics w/ the wheels on? Should look great w/ those silver hats behind your black VR3Ps. What kind of springs are those?
Will do.. As for suspension, I have the KW coilovers..
GTS Bruce
April 3rd, 2009, 11:08 PM
Have the full four wheel stop tech big brake kit sitting next to my car in boxes. Work to be done... GTS Bruce
Rocman
April 3rd, 2009, 11:26 PM
Good for you, pie gobbler..

Please, no smack in vehicle discussion forums.
dans69ss
April 4th, 2009, 07:47 AM
Looks good Bushido! I too have the same jack.
torquemonster
April 4th, 2009, 08:11 PM
great upgrade

I love getting parcels delivered too
281cammer
April 4th, 2009, 11:32 PM
Sweet!! I'm a hater, they looks great!!!
rt10stew
April 5th, 2009, 10:27 AM
Looks great. What is involved for an srt to rt/10 brake swap. I would like to know as I do not need the stopping power of a big brake upgrade but what I do want is some better looking calipers.
Thanks Stew
bushido
April 5th, 2009, 05:02 PM
Looks great. What is involved for an srt to rt/10 brake swap. I would like to know as I do not need the stopping power of a big brake upgrade but what I do want is some better looking calipers.
Thanks Stew

The stock GTS rear knuckles have been swapped to SRT10 knuckles. Its a straight bolton..
Too Blue
April 5th, 2009, 07:15 PM
Looks Good ..:thumbs:

I installed Hawk HPS and steel braided brake lines with the Eurotecks.

The combo works great and very little dust.
No Man
April 5th, 2009, 07:30 PM
Do you track the car on a road course?
bushido
April 5th, 2009, 07:35 PM
Do you track the car on a road course?

I havent yet..
rt10stew
April 5th, 2009, 08:20 PM
The stock GTS rear knuckles have been swapped to SRT10 knuckles. Its a straight bolton..


Thanks for the reply. now I have another item on the list of upgrades.:D
bushido
April 10th, 2009, 10:08 PM
Had the chance to take some pics. Pics with the wheels on..Lowered the back a bit more to..

Also, just to let you guys know. Euro-Teck rotors are made by Giro Disc.. If I would of known before hand. I would of just ordered my rotors directly with them instead..
http://www.girodisc.com/catalog/

http://i483.photobucket.com/albums/rr197/rapid25_2008/IMG_0356.jpg
http://i483.photobucket.com/albums/rr197/rapid25_2008/IMG_0357.jpg
http://i483.photobucket.com/albums/rr197/rapid25_2008/IMG_0360.jpg
http://i483.photobucket.com/albums/rr197/rapid25_2008/IMG_0355.jpg
Casey111
April 10th, 2009, 10:28 PM
Looks great man!
DEVILDOG
April 14th, 2009, 09:05 PM
Looks great! The design of the wheel shows up better against the silver hats on those rotors. You're killing me with those black VR3Ps.:lol: